|Year : 2022 | Volume
| Issue : 1 | Page : 66-69
The correlation of dentin elastic moduli and pH after exposed to combination of calcium hydroxide-propolis-propylene glycol
Ira Widjiastuti, Fauziah Diajeng Retnaningsih, Yashinta Ramadhinta, Salsabila Nunki Widona, Sukaton
Department of Conservative Dentistry, Faculty of Dental Medicine, Universitas Airlangga, Surabaya, Indonesia
|Date of Submission||30-Aug-2021|
|Date of Acceptance||27-Dec-2021|
|Date of Web Publication||21-Jan-2022|
Dr. Ira Widjiastuti
Department of Conservative Dentistry, Faculty of Dental Medicine, Universitas Airlangga, Jalan Mayjen Prof. Dr. Moestopo no 47, Surabaya, East Java
Source of Support: None, Conflict of Interest: None
Previous research states that adding propolis to powdered dental materials can increase the mechanical strength of the material. To analyze the differences and correlation of dentin elastic moduli and pH value after the exposure of calcium hydroxide, a mixture of propolis and calcium hydroxide, also a mixture of propylene glycol (PG), calcium hydroxide, and propolis. The dentine of bovine incisors was exposed into various compositions of a mixture of propolis, PG, and calcium hydroxide. The measurement of pH value and dentin elasstic moduli was performed after 7 days. To find difference among groups, one-way ANOVA was used, and Honestly significant difference (HSD) Tukey to compare each groups, followed by Pearson to define the correlation. A statistically meaningful difference was recorded between the groups (P < 0.05), and there was correlation between dentin elastic moduli and pH value. The more alkaline the environment, the more rigid the dentin.
Keywords: Calcium hydroxide, dentin elastic moduli, medicine, pH, propolis, propylene glycol
|How to cite this article:|
Widjiastuti I, Retnaningsih FD, Ramadhinta Y, Widona SN, Sukaton. The correlation of dentin elastic moduli and pH after exposed to combination of calcium hydroxide-propolis-propylene glycol. J Adv Pharm Technol Res 2022;13:66-9
|How to cite this URL:|
Widjiastuti I, Retnaningsih FD, Ramadhinta Y, Widona SN, Sukaton. The correlation of dentin elastic moduli and pH after exposed to combination of calcium hydroxide-propolis-propylene glycol. J Adv Pharm Technol Res [serial online] 2022 [cited 2022 Dec 1];13:66-9. Available from: https://www.japtr.org/text.asp?2022/13/1/66/336207
| Introduction|| |
Carious lesion is the result of carbohydrates metabolism process by cariogenic bacteria which can bring down the oral pH value and further cause localized demineralization of inorganic materials and destruction of dental organic material., The demineralization process, without treatment, may develop infection and bring about dental pain. One treatment of choices for pulpitis is pulp capping, a method of applying medicament on the exposed tooth tissue, or direclty on the pulp to maintain its vitality. This procedure may avoid further decay, which required more complicated and expensive treatment procedures.
Calcium hydroxide is one of the most common pulp capping materials which is considered as the gold standard inspite of its flaw in low compressive and tensile strength, low elastic moduli, and highly soluble., Dentin exposed to calcium hydroxide may have a slightly changes in its elastic moduli. Restoration materials are expected to have good elastic moduli, so that it can adapt on cavity margin fairly, to reduce a possibility of marginal leakage. The alkaline nature of calcium hydroxide is able to neutralize, dissolve, and denature the acidic proteins and proteoglycans in dentin. However, the acidic state in cavity can also neutralize its carboxyl group, thus, weakening the bond between hydroxyapatite crystals and collagen., The weakened bond between hydroxyapatite crystals and collagen caused by both alkaline and acidic milieu can affect the dentin elastic moduli which in turn can affect the marginal adaptation of teeth with restorative materials.
Previous research revealed an increase of mechanical strength of powdered dental material after supplemented with propolis. Thus, many researchers are interested in combining propolis with pulp capping agent to compensate its flaw. Studies found that combining propolis and calcium hydroxide can induce a better dental hard tissue formation, some others found its effect in multiple ratios.,
A common carrier for calcium hydroxide, other than propolis, is propylene glycol (PG). This material can enhance the calcium hydroxide effectiveness by stimulating the long-term release of hydroxyl ions and promoting calcium hydroxide passing through the dentin tubules. Furthermore, by the formation of intermolecular bonds, PG can increase bond strength and reduce setting time. As a result, PG was chosen in this study as a pulp capping accelerating agent by combining propolis and calcium hydroxide.
Due to the above-mentioned outcomes, this study aims to analyse the differences and correlation of dentin elastic moduli and pH value after exposed to combination of PG and propolis into calcium hydroxide.
| Materials and Methods|| |
This was a laboratory-based analytical study, which focused on the difference and correlation of dentin elastic moduli and pH value after exposed to the combination of PG and propolis into calcium hydroxide. Ethical approval for this study was given by the institutional review board with number 338/HRECC. FODM/XII/2018.
A number of 27 bovine teeth were used as the sample. For pH value analysis, a number of 3 groups of samples are prepared. Group I, filled with calcium hydroxide and distiled water; Group II, filled with calcium hydroxide and propolis; Group III, fillled with calcium hydroxide, PG, and propolis. Meanwhile, for dentin elastic moduli analysis, the samples were divided into 4 groups, and received the same treatment; with additional control group.
The extracted lower bovine incisors were immersed in saline solution. An access opening was performed for each tooth and root canal preparation using k file 80 subsequently and irrigated with saline solution. The root canal was then filled using lentulo and low-speed needles. The root canal fillings were made with a ratio of calcium hydroxide and distilled water into 1:1 for Group 1; a composition of 1.5:1 propolis and calcium hydroxide for Group 2; a ratio of 1:1.5:1 calcium hydroxide, PG, and propolis for Group 3. The coronal part of those teeth was then covered with a cotton pellet and filled with composite restoration. A resin composite sealing was also applied on the apical part of the teeth. The samples were then immersed in saline solution for 7 days.
First of all, we decapitated the coronal part of the teeth and made a root section at 5 mm by means of saw disc. The cut was kept in a container filled with deionized water for xx. The samples were then vibrated using ultrasonic, and the pH value was measured using pH meter.
Dentin elastic moduli analysis
To analyze the elasticity of the exposed dentin, the root of the teeth was made into a section of 10 mm × 3 mm × 3 mm, then embedded into an acrylic plate. Then, the samples were tested using a universal testing machine. The data were obtained and calculated using the formula:
Where E is the modulus of elasticity, m is displacement curve, l is specimen width, b is specimen length, and h is specimen height.
The data were shown in mean and standard deviations. Shapiro–Wilk test was conducted to determine the normality of the data distribution followed by homogeneity test using Levene Test. To analyze the differences, one-way ANOVA test was used with a significance level of 0.05 followed by the Post Hoc Tukey HSD test and correlation test using the Pearson test.
| Results|| |
The result of the study was tabulated in mean and standard deviation, shown in [Table 1] (pH value) and [Table 2] (dentin elastic moduli). According to Shapiro–Wilk Test, the data had a normal distribution since the pH measurement results of all treatment groups were significant with P = 0.200. According to Levene Test, the data were homogeneous with a P = 0.291. While the data for dentin elastic moduli also showed a normal distribution (P = 0.200) and homogeneity (P = 0.291).
The result showed a significant difference in terms of pH value (P = 0.000). Sample with highest pH value was recorded from Ca (OH) 2 and distiled water group, which significantly higher than group exposed to combination of propolis and Ca (OH) 2 (P = 0.000), and combination of Ca (OH) 2, propolis and glycol (P = 0.000) had the lowest pH value. As for dentin elastic moduli scores, the dentin only (control) was recorded to be the lowest compared to the combination of Ca (OH) 2, propolis and glycol (P = 0.000), combination of Ca (OH) 2 and propolis (P = 0.000), and a mixture of Ca (OH) 2 and distiled water (P = 0.000),
As showed in [Table 3], the correlation test showed a P > 0.01, which means significant in all groups. Thus, the pH value was significantly correlated to the dentin elastic moduli in all groups.
| Discussion|| |
Bovine teeth was chosen as the sample of this study due to their structure are similar to human teeth, and also their abundant existence. Study found no significant difference in diffusion level calcium hydroxide between human and bovine teeth.
Calcium hydroxide nature is alkaline, which can causes necrosis as it reaches the pulp tissue, disrupting the cell proliferation, thus decreasing cell differentiation, holding up the formation of Type 1 collagen. Thus, studies performed to compensate its flaw by combining calcium hydroxide with propolis, which its properties do not interfere the calcium dissociation process. However, it takes time for the combination of calcium hydroxide and propolis to set, makes it impractical to be used directly under resin restoration since the resin is hydrophilic. This may affect the resin bonding system with teeth. To overcome this limitation, PG was added to the calcium hydroxide-propolis combination to decrease the setting time. PG enhanced the calcium hydroxide effectiveness by inducing the long-term release of hydroxyl ions and increasing the diffusion of calcium hydroxide into the dentinal tubules. Moreover, PG functions as a thickening agent due to its ability to form intermolecular bonds, and it can increase bond strength and reduce the setting time. These factors play an important role in the entire process of dissociation and diffusion of calcium and hydroxyl ions released by calcium hydroxide into dentin.
In this study, the dentin elastic moduli was tested after exposure to calcium hydroxide. The study results showed that the modulus of elasticity of dentin exposed to the mixture of distilled water and calcium hydroxide was 23.874 Gigapascals (Gpa), calcium hydroxide combined with propolis was 9.529 Gpa, and the combination of the three materials was 7.186 Gpa compared to dentin (8.242 Gpa). These results are similar to findings of another study stating that dentin exposed to calcium hydroxide had a higher modulus of elasticity (21–23 Gpa) than the dentin (15–17 Gpa). The modulus of elasticity is considered as a material stiffness measurement; the higher the modulus of elasticity, the less change of shape when force is applied. Thus, a greater modulus of elasticity is associated with smaller or stiffer elastic strain. Another study concluded that lower modulus of elasticity was associated with lower marginal adaptation, which can lead to a gap between restorations and teeth.
Furthermore, studies show that the mechanical properties of dentin are influenced by moisture content. Dehydrated dentin enhances its elastic moduli, proportional limit, and compressive strength and stress. However, dentin that is exposed to calcium hydroxide paste has a significant increase in its modulus of elasticity and a decrease in its flexural strength that makes it more prone to fracture., This refers to the changes in the dentinal organic matrix. Calcium hydroxide dissolves pulp tissue that originated from denaturation and hydrolysis processes, and the high pH of calcium hydroxide impairs the organic support of the dentin matrix. This process weakens the interaction between collagen threads and hydroxyapatite crystals which adversely can affect the mechanical properties of dentin. In this study pH measurements were 12.716 for the combination of calcium hydroxide + distilled water, 8.527 for the combination of calcium hydroxide + propolis, and 7.325 for calcium hydroxide combined with propolis and PG. Similarly, other studies showed that the increase in hydrogen bonds between collagen threads can affect the stiffness and strength of teeth. This refers to the low pH that has the potential to reduce the material physical properties.
However, higher and lower pH can affect the mechanical strength of the material., Higher pH can result in higher surface strength and lower porosity of material while lower pH can change the microstructure of the material by increasing its porosity which ultimately will reduce the mechanical strength. This decrease can be referred to distribution of (OH-) ions, which can play a role in the initial setting due to the acidic atmosphere., Furthermore, the correlation between pH and the modulus of elasticity was also proven by another study showing that the more alkaline the environment, the exposed dentin will have higher elastic moduli, which means the dentin will be stiffer and more vulnerable.
| Conclusion|| |
The elastic moduli and pH value of the dentin exposed to a mixture of PG and propolis added to calcium hydroxide pH value and is smaller than the mixture of distilled water with calcium hydroxide and the mixture of propolis with calcium hydroxide. The dentin elastic moduli is correlated to its pH value; the more alkaline the enviromnent, the exposed dentin will have higher elastic moduli.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| References|| |
Pitts NB, Zero DT, Marsh PD, Ekstrand K, Weintraub JA, Ramos-Gomez F, et al.
Dental caries. Nat Rev Dis Prim 2017;3:1-16.
Garg N, Garg A. Textbook of Operative Dentistry. 2nd
ed. New Delhi: Jaypee Brothers Medical Publisher; 2013.
Nowicka A, Łagocka R, Lipski M, Parafiniuk M, Grocholewicz K, Sobolewska E, et al.
Clinical and histological evaluation of direct pulp capping on human pulp tissue using a dentin adhesive system. Biomed Res Int 2016;2016:2591273.
Dwiandhono I, Effendy R, Kunarti S. The thickness of odontoblast- like cell layer after induced by propolis extract and calcium hydroxide. Dent J (Majalah Kedokt Gigi) 2016;49:17-21.
Mickenautsch S, Yengopal V, Banerjee A. Pulp response to resin-modified glass ionomer and calcium hydroxide cements in deep cavities: A quantitative systematic review. Dent Mater 2010;26:761-70.
Sahebi S, Nabavizadeh M, Dolatkhah V, Jamshidi D. Short term effect of calcium hydroxide, mineral trioxide aggregate and calcium-enriched mixture cement on the strength of bovine root dentin. Iran Endod J 2012;7:68-73.
Bakland LK, Andreasen JO. Will mineral trioxide aggregate replace calcium hydroxide in treating pulpal and periodontal healing complications subsequent to dental trauma? A review. Dent Traumatol 2012;28:25-32.
Iliev G, Hardan L, Kassis C, Bourgi R, Cuevas-Suárez CE, Lukomska-Szymanska M, et al.
Shelf life and storage conditions of universal adhesives: A literature review. Polymers (Basel) 2021;13:2708.
Eliades G, Watts D, Eliades T. Dental Hard Tissues and Bonding: Interfacial Phenomena and Related Properties. Germany: Springer Berlin Heidelberg; 2005.
Sardana D, InduShekar K, Manchanda S, Saraf B, Sheoran N. Role of propolis in dentistry: Review of the literature. Focus Altern Complement Ther 2013;3:118-25.
Ozório JE, Carvalho LF, de Oliveira DA, de Sousa-Neto MD, Perez DE. Standardized propolis extract and calcium hydroxide as pulpotomy agents in primary pig teeth. J Dent Child (Chic) 2012;79:53-8.
Setyowati E. Compresive strength test of the combination of calcium hydroxide and propolis. Doctoral Dissertation. Universitas Airlangga; 2018.
Chua E, Parolia A, Ahlawat P, Pau A, Amalraj F. Antifungal effectiveness of various intra-canal medicaments against Candida albicans
: An ex-vivo
study. BMC Oral Health 2014;14:1-7.
Ghasemi N, Rahimi S, Shahi S, Salem Milani A, Rezaei Y, Nobakht M. Compressive strength of mineral trioxide aggregate with propylene glycol. Iran Endod J 2016;11:325-8.
Kunarti S. Pulp tissue inflammation and angiogenesis after pulp capping with transforming growth factor β1. Dent J 2008;41:88-90.
Natu VP, Dubey N, Loke GC, Tan TS, Ng WH, Yong CW, et al.
Bioactivity, physical and chemical properties of MTA mixed with propylene glycol. J Appl Oral Sci 2015;23:405-11.
Kwon OH, Kim DH, Park SH. The influence of elastic modulus of base material on the marginal adaptation of direct composite restoration. Oper Dent 2010;35:441-7.
Nalla RK, Kinney JH, Tomsia AP, Ritchie RO. Role of alcohol in the fracture resistance of teeth. J Dent Res 2006;85:1022-6.
Pashley DH, Tay FR, Carvalho RM, Rueggeberg FA, Agee KA, Carrilho M, et al.
From dry bonding to water-wet bonding to ethanol-wet bonding. A review of the interactions between dentin matrix and solvated resins using a macromodel of the hybrid layer. Am J Dent 2007;20:7-20.
Namazikhah MS, Nekoofar MH, Sheykhrezae MS, Salariyeh S, Hayes SJ, Bryant ST, et al.
The effect of pH on surface hardness and microstructure of mineral trioxide aggregate. Int Endod J 2008;41:108-16.
Doyon GE, Dumsha T, von Fraunhofer JA. Fracture resistance of human root dentin exposed to intracanal calcium hydroxide. J Endod 2005;31:895-7.
Saghiri MA, Lotfi M, Saghiri AM, Vosoughhosseini S, Fatemi A, Shiezadeh V, et al.
Effect of pH on sealing ability of white mineral trioxide aggregate as a root-end filling material. J Endod 2008;34:1226-9.
[Table 1], [Table 2], [Table 3]